LIFECOM's Calibration Lab is now...
ANSI/NCSL Z540, ISO 10012-1 STANDARDS COMPLIANT




•Canonball 3
Confined Space Gas Detector


When you're working in hazardous areas under harsh environmental conditions, the last thing you want to worry about is your gas detector. The easy-to-use Cannonball3 was designed to handle the worst that Mother Nature can dish out while delivering the high level of safety and reliability that you've come to expect from Biosystems.
The Cannonball3 is designed for the detection of oxygen deficiencies, flammable gases and vapors and a large number of toxic gases. The oversized display features a scratch-resistant, self-healing overlay and is the largest in its class. To keep the Cannonball3 up and running and to ease maintenance issues, the Cannonball3 features modular internal pump, batteries and filters that can be quickly replaced in the field.
More features than any other Biosystems gas detector, rugged enough for the harshest environment!





KEY FEATURES
Rugged and weatherproof The durable and impact-resistant case is sealed from the outside elements, allowing the Cannonball3 to operate reliably in the harshest environments. RFI shielding prevents operating interference with two-way radios and other electronic devices.

Oversized display for easy reading The large display ensures that readings are easy to view from several feet away or when visibility is limited. The display also features a scratch-resistant, self-healing urethane overlay that will keep the display clear and easy to read even after years of use.
Dilution pump For proper monitoring of combustible gases and vapors in oxygen deficient (less than 10%) or oxygen-free (fully inerted) environments. Optional dual internal pump module furnishes a set ratio of ambient air (or known fresh air source via remote attachment) with the sampled gas stream to enable the accurate measure of combustible gas/vapor in any conditions. Detector operating system can provide direct readings without the need for dilution factor "adjustment" or further conversion.
Large control buttons The MODE button and navigation arrows are designed for use with a gloved hand.
Unique visual alarms The three bright visual alarms on the Cannonball3 ensure that at least one of the LEDs can be viewed at all times.
Easy and convenient calibration One-button calibration and automatic recording of the last 10 calibration dates and times make the Cannonball3 easy to use.
HC-PPM LEL sensor Available with optional, high-sensitivity LEL sensor capable of displaying trace PPM-level combustible gases & vapors. In addition to the standard %LEL scale, the PPM scale (with 10 PPM resolution)

   provides broad-range monitoring capability for nearly all toxic combustible gases and vapors to address both health & safety concerns. Percent LEL and PPM response scales can be directly linked or de-coupled to monitor for different gases/vapors across the two ranges. Internal gas/vapor library provides handy reference tool for input of common gas/vapor %LEL, PPM relationship.
Interchangeable battery packs The Cannonball3 includes your choice of a rechargeable NiMH battery back or an Alkaline battery pack that uses 5 D-cell alkaline batteries. Battery packs are fully interchangeable.
* The NiMH battery pack provides up to 16 hours of use between charges.
* The Alkaline battery pack provides up to 24 hours of use between battery changes.
Internal pump The Cannonball3 automatically runs a pump test before each use to ensure that the pump and sample draw assembly are leak-free. The pump can draw the sample up to 200' for common gases/vapors (O2/LEL/CO/H2S) with standard (3/16" ID) fuel-resistant tubing.
Black box data recorder A built-in data recorder comes as standard equipment on the Cannonball3. The data recorder automatically logs information including sensor readings and provides a record of atmospheric conditions during operation.

•MultiVision
Confined Space Gas Detector
The MultiVision is a multi-gas detector designed to provide reliable safety at the touch of just one button. The MultiVision is available with up to four independent sensors for the detection of oxygen, combustible gases and vapors, carbon monoxide and hydrogen sulfide. The MultiVision features an extra large liquid crystal display (LCD) and an optional built-in sample pump, yet it is small enough to carry in your hand or clip to your belt. The MultiVision is loaded with numerous features that are critical for working safely in confined spaces.

RELIABLE, INEXPENSIVE AND EASY TO USE
KEY FEATURES
Easy one-button operation -- The MODE button on the left side of the MultiVision controls all day-to-day functions including:
* Scroll through current gas readings, MAX and TWA screens
* Initiate fresh air and span calibration sequences
* Turn on the backlight
Extra large display -- 2" by 1.5" (5.1 by 3.8 cm) easy-to-read, large, front-mounted backlit display.

Optional built-in pump -- fully automated testing with built-in motorized sample draw pump.
* Automatic switching between pump and diffusion modes.
* Factory installed.
* Automatic pump leak test before every use.
Rugged and weatherproof -- watertight, impact-resistant, chrome-plated ABS case.
* Rated to IPX5/IPX7 against water ingress (immersible). RFI Protection -- immune to Radio Frequency Interference to 40 V/m.
Long Battery Life -- for extended periods of continual use between charges.
* The NiMH battery pack provides up to 20 hours of use in diffusion mode and up to 16 hours with the pump on between charges.
* The Alkaline battery pack provides up to 16 hours of use in diffusion mode and up to 12 hours with the pump on between battery changes.

  Black box data recorder -- built-in data recorder provides a record of atmospheric conditions during operation.
* Stores more than 40 hours of instrument readings (one-minute sampling interval).
* Upgrade to a full datalogging instrument at any time.
Certifications -- UL Class I, Division 1, Groups A,B,C,D Temp Code T4. CSA Class I Division 1 Groups A,B,C,D Temp T3C. ATEX (DEMKO) EEx ia d IIC T4. CE Mark.


•PhD5
Confined Space Gas Detector

Remarkable Performance at an Affordable Price
The PhD5 monitors up to five atmospheric hazards simultaneously: oxygen, combustible gas, and up to three channels of toxic gas detection. Choose from a wide variety of toxic sensors; including Biosystems' innovative new "Duo-Tox" two-channel CO/H2S sensor to measure both carbon monoxide and hydrogen sulfide when both hazards are present without cross interference. The PhD5 is housed in a rugged, metal-plated case designed to stand up to the most demanding environments. All procedures necessary for day-to-day operation, including fully automatic calibration adjustment, are controlled through a single button. An easy-to-read graphics display and navigation keys to make the PhD5 even easier to use than earlier versions.


KEY FEATURES
True one-button operation All procedures necessary for day-to-day operation, including the initiation of the automatic calibration adjustment, are controlled through a single button.
Easy-to-read display The large graphics display and navigation arrows make advanced set-up choices easy to accomplish.

Alarms that get your attention Bright red LED alarm lights, highlighted readings for the channel in alarm and a loud audible alarm provide alarm state information.
Super rugged housing The PhD5 is housed in a rugged, compact, metal-plated, RFI-resistant case that is designed to stand up to the most demanding environments

Black box data recorder Built-in data recorder provides a record of atmospheric conditions during operation.

Interchangeable battery packs The PhD5 can be powered by a rechargeable NiCad battery pack or by 3 disposable AA alkaline batteries with the alkaline battery pack. Either battery pack will provide up to 12 hours of continuous operation.

Sample draw options Every PhD5 includes a manual sample draw kit. A motorized sample pump that is electronically monitored by the instrument is available separately

   Language options The PhD5 can display gas readings and other messages in English, French, Spanish, Portuguese, Italian, Norwegian and Polish.

Certifications UL Class I Division 1 Groups A,B,C,D Temp T4, UL Class II Division 1 Groups E,F,G, CSA Class I Division 1 Groups A,B,C,D Temp T3C, CENELEC (DEMKO) EEx ia d IIC T4,
CE Mark

 

•PhD Lite
Confined Space Gas Detector
The PhD Lite Confined Space Gas Detector monitors up to four atmospheric hazards simultaneously. Choose from oxygen, combustible gas and a number of toxic gas sensors. The PhD Lite is housed in a rugged, compact, metal-plated case designed to stand up to the most demanding environments. While all procedures necessary for day-to-day operation, including fully automatic calibration adjustment, are still controlled through a single button, the PhD Lite's large, easy-to-read graphics display and navigation keys mean the PhD Lite is even easier to use than earlier versions. PhD Lite Detectors are available in both rechargeable (NiMH) and disposable alkaline battery versions.
Smaller, tougher, lighter
and even easier to use!

KEY FEATURES
True one-button operation All procedures necessary for day-to-day operation. including the initiation of the automatic calibration sequence are controlled by a single button.
Multiple languages The PhD Lite can be set to display messages and readings in a variety of languages. The languages currently available are Portuguese, French, Spanish, Danish, Italian, English, Polish, Norwegian, German, Lithuanian and Catalan.
Easy to use The large graphics display and front-mounted navigation keys make advanced set-up choices intuitive and easy to accomplish. A manually-activated backlight allows the display to be seen even in low light conditions.
Sample draw options Every PhD Lite includes a manual sample draw kit. A slip-on motorized sample pump that is powered and electronically monitored by the instrument is available separately. Alarms that get your attention The loud audible alarm is coupled with a top-mounted LED alarm light that is visible from the top, front, back and both sides of the instrument.
Rugged housing The PhD Lite is housed in a compact, rugged RFI-resistant, metal-plated case that is designed to stand up to the most demanding environmental conditions.

  Upgradeable black box data recorder Every PhD Lite includes a "black box" datalogger that stores information such as gas readings, turn-on times, turn-off times and battery conditions. The "black box" data recorder can be upgraded to a full datalogger at any time.
Rechargeable or disposable battery option The PhD Lite can be powered by either a built-in rechargeable NiMH battery, or by disposable alkaline batteries. Either battery option provides up to 12 hours of operation.

 

 


OUR SALES REPS. ARE STANDING BY NOW TO ANSWER ANY QUESTIONS
YOU MAY HAVE REGARDING BIOSYSTEMS PRODUCTS.
CALL TOLL FREE: 1-800-824-5178
OR
E-MAIL SALES AT: kurt@lifecominc.com

l------------
Gas Monitors
------------l
Fall Protection
Blowers
l-----SCBA / SAR------l